00 Introduction and technical data: Tightening torques
- Make
- Fiat
- Model
- Scudo Factory Service Manual
- Year
- 1996–2006
- Section
- Tightening torques › Tightening torques
00 Introduction and technical dataTightening torques · page 1 of 2
Tightening torques
F1
| DESCRIPTION | Thread size | Tightening torques | ENGINE | ||
|---|---|---|---|---|---|
| daNm | [1581 SPI] | [1905 D] | [1905 TD] | ||
| Differential flange fixing, bolt | – | 2,4 | ● | ||
| Lay shaft fixing, nut | – | 19 | ● | ||
| Cover fixing, bolt | – | 0,7 | ● | ||
| Crown wheel-differential casing fixing, bolt | – | 8,5 | ● | ||
FRONT SUSPENSION
F3
| DESCRIPTION | Thread size | daNm | [1581 SPI] | [1905 D] | [1905 TD] |
|---|---|---|---|---|---|
| Upper shock absorber fixing, nut | M14×1,5 | 9 | ● | ● | ● |
| Shock absorber flex. mounting to bodyshell fixing, bolt | M10×1,25 | 4,5 | ● | ● | ● |
| Shock absorber to steering knuckle fixing, nut | M12×1,25 | 11 | ● | ● | ● |
| Front track control arm to bodyshell fixing, bolt (L=33) | M12×1,25 | 10,5 | ● | ● | ● |
| Rear track control arm to bodyshell fixing, bolt | M12×1,25 | 10,5 | ● | ● | ● |
| Rear track control arm and anti-roll bar to bodyshell fixing, bolt | M12×1,25 | 10,5 | ● | ● | ● |
| Ball joint to steering knuckle fixing, nut | M10×1,25 | 7 | ● | ● | ● |
| Anti-roll bar to track control arm fixing, nut | M12×1,25 | 8,5 | ● | ● | ● |
| Front brake caliper to steering knuckle fixing, bolt | M12×1,25 | 10 | ● | ● | ● |
| Front brake disc to hub fixing, bolt | M10 | 2,5 | ● | ● | ● |
| Wheel hub fixing, nut | M24×1,5 | 30 | ● | ● | ● |
| Power assisted steering box to frame fixing, bolt | M14×1,5 | 13 | ● | ● | ● |
| Steering control rod joint fixing, nut | M10×1,25 | 3,8 | ● | ● | ● |
Parts & tools for this job For 1996 Fiat Scudo
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.