Camshaft bushing

Make

Fiat

Model

Seicento Factory Service Manual

Year

1998–2010

Section

Operative data › Camshaft bushing

00 General information and technical dataCamshaft bushing

(Continued)

Camshaft bushing

Camshaft bushing outer diameter (mm)				Validity
CL.B	CL.C	CL.D	CL.E
Ø1 36.030 - 36.068	–	–	–	899
Ø2 46.533 - 46.571	–	–	–	899
Ø3 50.485 - 50.500	50.495 - 50.510	50.685 - 50.700	50.695 - 50.710	899

Camshaft bushing inner diameter (mm)			Validity
Ø1	Ø2	Ø3
31.026 - 31.046	43.404 - 43.424	38.025 - 38.050	899

Camshaft pin -bushing clearance (mm)			Validity
Bushing 1	Bushing 2	Bushing 3
0.026 - 0.071	0.031 - 0.076	0.025 - 0.075	899

Camshaft bushing - crankcase interference (mm)			Validity
Bushing 1	Bushing 2	Bushing 3
0.079 - 0.147	0.083 - 0.151	0.015 - 0.040	899

Rocker arm - Rocker arm holder axes

Rocker arm diameter (mm)	Validity
15.010 - 15.030	899

Rocker arm support diameter (mm)	Validity
15.010 - 15.028	899

Rocker arm holder shaft diameter (mm)	Validity
14.978 - 14.990	899

Rocker arm holder shaft - rocker arm clearance (mm)	Validity
0.020 - 0.052	899

Rocker arm shaft - rocker arm clearance (mm)	Validity
0.020 - 0.050	899

Hydraulic tappet diameter (mm)	Validity
11.94 - 11.99	899

Hydraulic tappet seat on rocker arm (mm)	Validity
12.00 - 12.023	899

Hydraulic tappet - rocker arm clearance (mm)	Validity
0.010 - 0.083	899

Tappet clearance for timing check (mm)	Validity
Intake	Exhaust
0.45	0.45

Tappet working clearance (mm)	Validity
Intake	Exhaust
–	–	899

01 General