Installation (page 2 of 2)
- Make
- Fiat
- Model
- Seicento Factory Service Manual
- Year
- 1998–2010
- Section
- Cylinder head (1108 Euro 3)
10 EngineInstallation · page 2 of 2
Description Connector
| - Idle actuator | N74 |
- Connect the electrical connector for the butterfly valve position sensor.
Description Connector
| - Throttle position sensor (i.e.) | K56 |
- Connect the electrical connector for the engine idle speed actuator.
Description Connector
| - Idle actuator | N74 |
- Connect the electrical connector for the butterfly valve position sensor.
Description Connector
| - Throttle position sensor (i.e.) | K56 |
- Connect the electrical connector for the rpm sensor.
Description Connector
| - RPM sensor | K46 |
- Connect the electrical connector for the cam angle sensor.
Description Connector
| - Timing sensor | K47 |
- See Op. 1080D24 Engine oil vapour intake pipe - r + r
- Connect the battery negative terminal.
Description Connector
| - Battery | A1 |
- Close the bonnet lid.
Parts & tools for this job For 1998 Fiat Seicento
- PARTEngine gasket setSearch: Fiat Seicento 1998 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.