Refitting
- Make
- Fiat
- Model
- Seicento Factory Service Manual
- Year
- 1998–2010
- Section
- Engine lubrication (1108) › Refitting
10 EngineRefitting
(Cont. Op. 1084B16)
- Follow Op. 1084B28 Engine oil intake PUMP - R+R. with crankcase sump removed
- See Op. 1004E20 ENGINE - Disassembly and re-assembly following Op. 1004E10 - Washing and check of disassembled parts - Cylinder head and oil sump refitting - Does not include repairs on cylinder head and auxiliary units
Refitting
- See Op. 1004E20 ENGINE - Disassembly and re-assembly following Op. 1004E10 - Washing and check of disassembled parts - Cylinder head and oil sump refitting - Does not include repairs on cylinder head and auxiliary units
- Complete with Op. 1084B28 Engine oil intake PUMP - R+R. with crankcase sump removed
- Complete with Op. 1020A26 CRANKCASE SUMP - R+R. clean sealing surfaces and apply sealant for cars with air conditioner
- Complete with Op. 1084B30 ENGINE OIL CARTRIDGE FILTER - R+R.
- Complete with Op. 1076B50 Exhaust PIPE attachment to engine/manifold- R+R.
- Complete with Op. 1032B44 TOOTHED DRIVE PULLEY - R+R. with timing belt removed
- Complete with Op. 1032B14 Tappet drive TOOTHED BELT - R.R. for timing of distribution or for replacement on version with air conditioner
- Complete with Op. 7055B42 SUPPLEMENTARY WHEEL HOUSING (one) - R.R.
- Complete with Op. 4450B10 Front WHEEL (one) - R.R.
- Complete with Op. 5540B10 HEADLAMP (one), lh or rh - R+R.
- Connect the negative (-) battery terminal
| Name | Connector |
|---|---|
| Battery | A1 |
- Complete with Op. 1084A10 ENGINE OIL - Level check and top up where necessary
- Remove the vehicle from the hoist.
1084B28 - ENGINE OIL INTAKE PUMP - R+R. WITH CRANKCASE SUMP REMOVED
Removal
- Unscrew the engine oil intake pump screws.
- Remove the engine oil intake pipe (2a) and the gasket (2b).
Refitting
- Install the engine oil intake pump with the gasket and fasten with its screws.
1084B30 - ENGINE OIL CARTRIDGE FILTER - R+R.
Removal
- Place the car on a hoist and raise it.
- Unscrew the engine compartment protection screws.
- Remove the engine compartment protection.
- Drain the engine oil from the sump(see Op. 1084B04 LUBRICATION CIRCUIT - Engine interior washing - Replace oil and filter).
(Cont.)
Parts & tools for this job For 1998 Fiat Seicento
- PARTEngine gasket setSearch: Fiat Seicento 1998 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.