Workshop Manuals Factory service & repair Fiat
01 00 General information and technical data02 10 Engine03 18 Clutch04 21 Gearbox and differential05 27 Axle06 33 Braking system07 41 Steering08 44 Suspension and wheels09 50 Auxiliary units10 55 Electrical equipment11 70 Bodywork12 Diagnosis13 Tests14 Wiring diagrams
Fiat Seicento Factory Service Manual (1998-2010)02 · 10 Engine
02 · Engine

Refitting

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Engine lubrication (1108) › Refitting
10 EngineRefitting

(Cont. Op. 1084B30)

  1. Unscrew the engine oil cartridge filter using the relevant tool and remove
NameCode
Wrench1.860.662.000

The used engine oil and replaced oil filter contain substances harmful for the environment. Place the oil and filter in the specific containers.

Line drawing of the engine oil cartridge filter located in the engine compartment, with callout number 1 pointing to the filter element.

Refitting

  • Moisten both faces of the new filter gasket with engine oil.
  • Screw the engine oil cartridge filter by hand, fully tightening it.
  • Assemble the engine compartment protection and fasten with its screws.
  • Lower the hoist.
  • Fill the lubrication circuit with oil
TypeComponentNameQty
Oil (l)ENGINE LUBRICATION CIRCUITVS MAX (SAE 15W/40)3.5
  • Complete with Op. 1084A10 ENGINE OIL - Check level and top up if necessary.
  • Remove the vehicle from the hoist.

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.