Workshop Manuals Factory service & repair Fiat
01 00 General information and technical data02 10 Engine03 18 Clutch04 21 Gearbox and differential05 27 Axle06 33 Braking system07 41 Steering08 44 Suspension and wheels09 50 Auxiliary units10 55 Electrical equipment11 70 Bodywork12 Diagnosis13 Tests14 Wiring diagrams
Fiat Seicento Factory Service Manual (1998-2010)02 · 10 Engine
02 · Engine

1084a - indication / control devices overview

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Engine lubrication (899) › 1084a - indication / control devices overview
10 Engine1084a - indication / control devices overview

1084A - INDICATION / CONTROL DEVICES OVERVIEW

Diagram of engine showing oil level rod, filler cap, and pressure switch locations
Ref. Name
- ENGINE OIL LEVEL CHECK AND TOPPING UP
1 ENGINE OIL FILLER CAP/GASKET
2 ENGINE OIL LEVEL ROD
3 ENGINE OIL LEVEL ROD GASKET
4 ENGINE OIL LOW PRESSURE WARNING LIGHT SWITCH

List of operations

Code Operation Validity
1084A10 Engine oil - Level check and top-up if necessary 899
1084A42 Switch for engine oil pressure warning light - R+R. 899

OPERATIONS

1084A10 - ENGINE OIL - LEVEL CHECK AND TOP UP IF NECESSARY

Note: The check is to be carried out with the car on level, with the engine off and a few minutes after the engine has been switched off.

  • Open the engine compartment.
  1. Use the control rod to check that the engine oil level is within the MIN and MAX levels marked on the rod.
  2. If necessary top up the level with oil after removing the engine oil filler cap.
Type Component Name Qty
- Oil ENGINE OIL LEVEL CHECK AND TOP UP VS MAX (SAE 15W/40) -

(Cont.)

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.