Tensioning value of new belt
- Make
- Fiat
- Model
- Seicento Factory Service Manual
- Year
- 1998–2010
- Section
- Engine miscellaneous drives (899) › Tensioning value of new belt
10 EngineTensioning value of new belt
(Cont. Op. 1092B54)
Tensioning value of new belt
| Measure | Value |
|---|---|
| - Tension (daN) | 40 - 55 |
Tighten the alternator securing screws to correct torque
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| 1 | Screw | ALTERNATOR | M10 | 4.9 |
- Assemble the front right supplementary wheel housing (see Op. 7055B42 SUPPLEMENTARY WHEEL HOUSING (one) - R+R).
- Assemble the engine compartment protection and fasten with its screws.
- Assemble the front right wheel (see Op. 4450B10 front WHEEL (one) - R+R).
- Lower the vehicle.
- Connect the negative (-) battery terminal
| Name | Connector |
|---|---|
| - Battery | A1 |
- Close the engine compartment.
- Remove the vehicle from the hoist.
Parts & tools for this job For 1998 Fiat Seicento
- PARTEngine gasket setSearch: Fiat Seicento 1998 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.