Workshop Manuals Factory service & repair Fiat
Fiat Seicento Factory Service Manual (1998-2010)02 · 10 Engine
02 · Engine

Refitting

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Exhaust pipes and silencers (1108) › Refitting
10 EngineRefitting

(Cont. Op. 1076B12)

  1. Take out the rear exhaust silencer flexible supports.
Diagram showing the rear underside of the vehicle with callout lines F2 and 1 pointing to the exhaust pipe and its flexible support mountings.
  1. Take out the front exhaust silencer flexible support and remove the exhaust pipe.
Close-up diagram of the exhaust system showing a flexible joint and mounting bracket, with callout line 1 pointing to the flexible support.

Refitting

  • Fit the exhaust pipe back in place.
  • Insert the front exhaust silencer flexible support.
  • Insert the rear exhaust silencer flexible supports.
  • Complete with Op. 1076B50 Exhaust PIPE mounting to engine/manifold - R+R.
  • Lower the vehicle.
  • Connect the negative (-) battery terminal
NameConnector
BatteryA1
  • Close the engine compartment.
  • Remove the vehicle from the hoist.

1076B20 - REAR EXHAUST SILENCER - R+R

Removal

  • Place the car on the hoist and raise it.
  1. Loosen the exhaust silencer flange nut.
  2. Take out the exhaust silencer front flexible support.
Under-vehicle view showing a hand using a wrench to loosen a nut on an exhaust flange connection, with callout line 1 indicating the area.
  1. Take out the rear flexible supports and remove the exhaust silencer.
Diagram showing the rear underside of the vehicle with callout lines F6 and 1 pointing to the exhaust silencer and its flexible support mountings.

Refitting

  • Fit the rear exhaust silencer back in place, connecting it to the catalytic converter.
  • Insert the exhaust silencer front flexible support.
  • Insert the exhaust silencer rear flexible supports.
  • Tighten the exhaust silencer flange nut to correct torque
FasteningComponentØValue (daNm)
NutREAR EXHAUST M8 SILENCER2.5
  • Lower the car and remove it from the hoist.

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.