Refitting

1. Unscrew the catalytic converter flange nuts.
2. Shift the support bracket.

1. Unscrew the nuts that fasten the exhaust pipe to the manifold.
2. Take out the lambda sensor electric cable from the strap.

1. Remove the exhaust pipe.

Before removing the exhaust pipe make sure that the lambda sensor electric cable does not remain entangled.

Refitting

• Assemble the exhaust pipe.
• Tighten the exhaust pipe - manifold fastening nuts to correct torque

• Return the support bracket to its original position.
• Tighten the catalytic converter front flange nuts to correct torque

• Insert the lambda sensor electric cable in the strap.
• Assemble the engine compartment protection and fasten with its screws.
• Lower the vehicle.
• Connect the lambda sensor electrical connection.

• Connect the negative (-) battery terminal

• Remove the vehicle from the hoist.