Workshop Manuals Factory service & repair Fiat
01 00 General information and technical data02 10 Engine03 18 Clutch04 21 Gearbox and differential05 27 Axle06 33 Braking system07 41 Steering08 44 Suspension and wheels09 50 Auxiliary units10 55 Electrical equipment11 70 Bodywork12 Diagnosis13 Tests14 Wiring diagrams
Fiat Seicento Factory Service Manual (1998-2010)02 · 10 Engine
02 · Engine

Refitting

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Exhaust pipes and silencers (899) › Refitting
10 EngineRefitting

(Cont. Op. 1076B12)

  1. Take out the rear flexible supports of the exhaust silencer.
Diagram showing the rear section of the exhaust system with callout number 1 pointing to a flexible support near the wheel
  1. Take out the front flexible support of the exhaust silencer and remove the exhaust pipe.
Diagram showing the connection point of the exhaust pipe to the catalytic converter with callout number 2

Refitting

  • Fit the exhaust pipe back in place.
  • Insert the exhaust silencer front flexible support.
  • Insert the exhaust silencer rear flexible supports.
  • Complete with Op. 1076B50 Exhaust PIPE attachment to engine/manifold - R+R.
  • Lower the vehicle.
  • Connect the negative (-) battery terminal
NameConnector
- BatteryA1
  • Close the engine compartment.
  • Remove the vehicle from the hoist.

1076B20 - REAR EXHAUST SILENCER - R+R

Removal

  • Place the car on the hoist and raise it.
  1. Loosen the exhaust silencer flange nut.
  2. Take out the exhaust silencer front flexible support.
Diagram showing the front connection of the exhaust silencer with callout number 1 pointing to the flange nut area
  1. Take out the rear flexible supports and remove the exhaust silencer.
Diagram showing the rear section of the exhaust system with callout number 1 pointing to the rear flexible support

Refitting

  • Fit the rear exhaust silencer back in place, connecting it to the catalytic converter.
  • Insert the exhaust silencer front flexible support.
  • Insert the exhaust silencer rear flexible supports.
  • Tighten the exhaust silencer flange nut to correct torque
FasteningComponentØValue (daNm)
- NutREAR EXHAUST SILENCERM82.5
  • Lower the car and remove it from the hoist.

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.