Workshop Manuals Factory service & repair Fiat
Fiat Seicento Factory Service Manual (1998-2010)02 · 10 Engine
02 · Engine

1072c - exhaust manifolds overview

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Intake and exhaust manifolds (899) › 1072c - exhaust manifolds overview
10 Engine1072c - exhaust manifolds overview

1072C - EXHAUST MANIFOLDS OVERVIEW

Diagram of exhaust manifold assembly showing three numbered components: 1, 2, and 3.
Ref. Name
1 EXHAUST MANIFOLD/S
2 EXHAUST MANIFOLD/S GASKET
3 EXHAUST MANIFOLD/S HEAT SHIELD BULKHEAD

List of operations

Code Operation Validity
1072C10 Exhaust manifold - R+R and Replace gasket 899
1072C44 Exhaust manifold heat shield bulkhead - R+R 899

1072C10 - EXHAUST MANIFOLD - R+R AND REPLACE GASKET

Removal

  • Position the vehicle on a hoist.
  • Open the engine compartment.
  • Assemble the body protection covers.
  • Disconnect the negative (-) battery terminal.
Name Connector
- Battery A1
  1. Release the air cleaner cover clasps.
  2. Unscrew the throttle case air conveyor screws.
  3. Take out the oil vapours recovery pipe from the tappet cover.
  4. Take out the oil vapours recovery pipe from the throttle case.
Diagram of engine compartment showing removal steps with callout numbers 1, 3, and 4 pointing to specific components.

(Cont.)

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.