Workshop Manuals Factory service & repair Fiat
Fiat Seicento Factory Service Manual (1998-2010)02 · 10 Engine
02 · Engine

Refitting

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Power unit mounts (1108) › Refitting
10 EngineRefitting

(Cont. Op. 1008A46)

Name Connector
Battery A1
  • Follow Op. 4450B10 FRONT WHEEL (one) - R.R.
  • Follow Op. 7055B42 SUPPLEMENTARY WHEEL HOUSING (One) - R.R.
  • Place a hydraulic jack under the engine.
  1. Unscrew the flexible block screw.
  2. Unscrew the rigid support nuts.
  3. Remove the support.
Diagram showing the removal of the power unit support, with callout numbers 1 and 2 pointing to the rigid support nut and flexible block screw respectively.

Refitting

  • Refit the rigid support.
  • Tighten the rigid support nuts to the correct torque
Fastening Component Ø Value (daNm)
Nut POWER UNIT SUPPORT TIMING SYSTEM SIDE M10 5.1
  • Tighten the flexible block screw to the correct torque
Fastening Component Ø Value (daNm)
Screw FLEXIBLE BLOCK TIMING SYSTEM SIDE M10 5.1
  • Remove the hydraulic jack.
  • Complete with Op. 7055B42 SUPPLEMENTARY WHEEL HOUSING (one) - R.R.
  • Complete with Op. 4450B10 FRONT WHEEL (one) - R.R.
  • Connect the negative (-) battery terminal
Name Connector
Battery A1
  • Remove the vehicle from the hoist.

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.