1008A - Power unit fastenings
- Make
- Fiat
- Model
- Seicento Factory Service Manual
- Year
- 1998–2010
- Section
- Power unit mounts (1108 Euro 3) › 1008A - Power unit fastenings
10 Engine1008A - Power unit fastenings
1008A - Power unit fastenings
VIEW OF ASSEMBLY
Operations index
| Code | Operation | Validity |
|---|---|---|
| 1008A44 | Rear rigid mount - r r | 1108 |
OPERATIONS
1108
1008A44 - REAR RIGID MOUNT - R R
Removal
1108
Euro 3
- Position the vehicle on the ramp.
- Disconnect the battery negative (-) terminal.
| Description | Connector |
|---|---|
| - Battery | A1 |
- Position a hydraulic jack under the gearbox.
- Undo the retaining bolts of the rear flexible mounting on the bodyshell.
- Undo the rear rigid mount retaining bolts.
- Remove the power unit rear mount.
1108
Euro 3
- Loosen the bolt securing the flexible block to the rear rigid mount.
- Remove the flexible block from the rear rigid mount.
Parts & tools for this job For 1998 Fiat Seicento
- PARTEngine gasket setSearch: Fiat Seicento 1998 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.