Workshop Manuals Factory service & repair Fiat
01 00 General information and technical data02 10 Engine03 18 Clutch04 21 Gearbox and differential05 27 Axle06 33 Braking system07 41 Steering08 44 Suspension and wheels09 50 Auxiliary units10 55 Electrical equipment11 70 Bodywork12 Diagnosis13 Tests14 Wiring diagrams
Fiat Seicento Factory Service Manual (1998-2010)10 · 55 Electrical equipment
10 · Electrical

Precautions

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Instruments › Precautions
55 Electrical equipmentPrecautions

PRECAUTIONS

When operating on electric components always attain to the following precautions.

  • Remove rings, wrist watches or other metal objects.
  • Before intervening on the electric system (connectors, electric devices, wiring, etc.) DISCONNECT THE BATTERY.
  • Beware of electric arcs. Although the battery voltage is 12V, the battery can output high currents in the event of a short circuit. This can cause arcs or sparks which can be dangerous to the operator or could be the cause of fire.
  • Beware of high voltage. The electronic ignition system can generate voltages of 20,000V or more. This can be extremely dangerous. Work with extreme caution on or near components.
  • Beware of fire. Never smoke when working near the battery or components subject to heating during operation (e.g. halogen lights) nor in the engine compartment when the engine is warm. Avoid burns or damage to tools and components.

1108 Sporting

5560B03 - REV COUNTER - R.R.

Removal

  1. Remove the cover (1a) located on the rear of the dome (1b).
Diagram showing the rev counter cover (1a) and dome (1b) on the dashboard
Close-up diagram showing the screw fastening the dome to the dashboard
  1. Remove the screw fastening the dome to the dashboard.
Diagram showing the removal of the dome from its seat and disconnecting the rev counter electric connections (1)
  1. Remove the dome from its seat and disconnect the rev counter electric connections.
NameConnector
1 Rev counterE15
  • Remove the rev counter.
Diagram showing the disconnection of the electrical connector (1) from the rev counter unit

Refitting

  • Reconnect the rev counter electric connection.
  • Position the rev counter in its seat and screw the screw fastening it to the dashboard.
AttachmentComponentØValue (daNm)
- ScrewRev counterM63.82 - 4.72
  • Fit the cover on the dome.

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.