Refitting

(Op.5560B14 continued)

1. Turn the bulb holder (1a) anti-clockwise and remove it to release the printed circuit (1b).
2. Lift the instrument unit by means of the for retaining pegs.

1. Remove the three fastening nuts (1a) of the fuel level gauge and disconnect the clock (1d) electric connection with care.
2. Remove the two speedometer screws and remove the instruments.

Refitting

• Assemble the instruments in the instrument unit and screw the two retaining screws fastening the speedometer.
• Connect the clock electric connection with care and screw the three fuel level gauge fastening nuts.
• Fit the instrument unit to the instrument panel. Position the circuit and assemble warning light bulb holder.
• Assemble the instrument panel on the flap and screw the four fastening screws.