Reassembly
- Make
- Fiat
- Model
- Seicento Factory Service Manual
- Year
- 1998–2010
- Section
- Warning and manoeuvre signals › Reassembly
55 Electrical equipmentReassembly
(Op. 5550D17 continued)
Reassembly
- Check bulb operation.
- Assemble bulbs in bulb holder.
- Assemble bulb holder and screw the fastening screws.
- Complete with Op. 5550D16 - THIRD BRAKE LIGHT - R.R
- Complete with Op. 7015A08 - REAR WINDOW WIPER MOTOR GUARD - R.R
5550D18 - HANDBRAKE WARNING LIGHT SWITCH - R.R
Removal
- Perform Op. 7040L20 - TUNNEL PANEL - R.R
- Perform Op. 2125C26 - LEVER/KNOB COVER - R.R for versions with reverse engagement device.
- Disconnect the electric connection from the screw.
| Description | Connector | |
|---|---|---|
| 1 | Handbrake switch | I40 |
- Remove the fastening screw (2a) and remove the switch (2b).
Reassembly
- Assemble the switch in its seat and screw the fastening screw.
- Connect the electrical connections.
- Complete with Op. 7040L20 - TUNNEL PANEL - R.R
- Complete with Op. 2125C26 - LEVER/KNOB COVER - R.R for versions with reverse engagement device.
5550D22 - REVERSING LIGHT SWITCH - R.R
Removal
- Position the vehicle on a shop jack
- Lift the vehicle and disconnect the electric connection.
| Description | Connector | |
|---|---|---|
| 1 | Reversing light switch | I20 |
- Unscrew and remove the reversing light switch.
Reassembly
- Check whether the switch is damaged. If required, check electric operation.
- Screw reversing light switch.
- Connect the electrical connections.
- Lower the shop jack and remove the vehicle.
- Check reversing light operation.
Parts & tools for this job For 1998 Fiat Seicento
- TOOLDigital multimeterSearch: automotive digital multimeter
- PARTAssorted fuse kitSearch: car fuse assortment kit
- TOOLWire crimper and connector kitSearch: wire crimper connector kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.