Safety belts a
- Make
- Fiat
- Model
- Seicento Factory Service Manual
- Year
- 1998–2010
- Section
- Accessories and inner fittings › Safety belts a
70 BodyworkSafety belts a
SAFETY BELTS A
7065C54 - RADIO COMPARTMENT - R.R.
Removal
- Release radio compartment(1a) removing fixing tabs (1b).
Refitting
- Place radio compartment in its seat again.
7065C68 - REAR VIEW MIRROR - R.R.
Removal
- Carry out Op. 7040E10 - FRONT ROOF LAMP - R.R.
- Unscrew roof panel fixing screws to rear view mirror.
- Unscrew fixing screws(2a) and remove rear view mirror (2b).
Refitting
- Position rear view mirror and screw fixing screws to body.
- Screw roof panel fixing screws on rear view mirror.
- Complete with Op. 7040E10 - FRONT ROOF LAMP - R.R.
7065C72 - FRONT CIGAR LIGHTER SEAT / SOCKET - R.R.
Removal
- Extract cigar lighter.
- Extract cigar lighter seat (2a),disconnect the connection (2b), remove cigar lighter seat.
| Name | Code | |
|---|---|---|
| 2a | Pliers | 1.876.044.000 |
| Name | Connector | |
|---|---|---|
| 2b | Cigar lighter / socket | P50 |
Refitting
- Check that cigar lighter seat is not damaged.
- Connect cigar lighter connection.
- Place cigar lighter seat in tunnel trimming.
- Install cigar lighter.
Parts & tools for this job For 1998 Fiat Seicento
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Fiat Seicento
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.