Workshop Manuals Factory service & repair Fiat
Fiat Seicento Factory Service Manual (1998-2010)11 · 70 Bodywork
11 · Body & interior

Refitting

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
Rear seats › Refitting
70 BodyworkRefitting

(Op. 7050A38 continued)

  1. Unscrew the nut (1a) remove the washer (1b) detach the connection / hinge (1c) from the seat backrest.
Diagram showing the removal of the connection/hinge (1c), washer (1b), and nut (1a) from the seat backrest.

Refitting

  • Position the connection/ hinge in the pin of the seat backrest .
  • Position the washer and tighten the fixing nut of the connection / hinge.
  • Complete with Op. 7050A18 - BACKREST OF A REAR SEAT - R.R.

7050A42 - REAR BACKREST CATCH (ONE) - R.R.

Removal

  • Carry out Op. 7050A18 - BACKREST OF A REAR SEAT - R.R.
  1. Remove the handle (1a) unscrew the screw (1b) of the backrest catch upholstery.
Diagram showing the removal of the upholstery (1a) and the catch (1b) from the backrest.
  1. Remove the upholstery (1a) and the catch (1b) from the backrest.
Diagram showing the reassembly of the catch (1b) and upholstery (1a) on the backrest.

Refitting

  • Reassemble the catch on the backrest.
  • Fasten with the fixing screws the upholstery and the backrest catch.
  • Position the handle of backrest release/lock control in the proper seat.
  • Complete with Op. 7050A18 - BACKREST OF A REAR SEAT - R.R.

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.