W10 Black smoke in exhaust
- Make
- Fiat
- Model
- Seicento Factory Service Manual
- Year
- 1998–2010
- Section
- Emissions › W10 Black smoke in exhaust
DiagnosisW10 Black smoke in exhaust · page 1 of 2
W10 Black smoke in exhaust
A high degree of black smoke is noted in exhaust.
| Step | Validity | Operation to be performed | Test results | ||
|---|---|---|---|---|---|
| OK | ! | 🔧 | |||
| Step | Validity | Operation to be performed | OK | Problems found | Intervention |
| 1 | CHECK AIR CIRCUIT | All OK | Problems found | Intervention | |
| Check – air cleaner conditions – intactness and tightness of air delivery circuit |
Go to Step 2 | Damaged circuit part | Replace part PROCEDURE OP. 1048A |
||
| 2 | CHECK WITH DIAGNOSTIC TOOL | All OK | Problems found | Intervention | |
| Connect diagnostic tool (Examiner or other tool) to the diagnostic socket. Check: – no fault in engine ECU – plausibility of all parameters |
Go to Step 3 | Detected error in ECU | Continue as shown by the diagnostic tool | ||
| Failed dialogue with ECU | Restore connection between engine ECU and diagnostic socket (Wiring diagram: E5030 “PETROL ENGINE ELECTRONIC MANAGEMENT”) |
||||
| 3 | ACTIVE TEST WITH DIAGNOSTIC TOOL | All OK | Problems found | Intervention | |
| With the diagnostic tool (Examiner or other tool) perform the active injector test | Go to Step 4 | Faulty injector | Restore connection between injector and ECU, (Wiring diagram: E5030 “PETROL ENGINE ELECTRONIC MANAGEMENT”) If required, replace injector PROCEDURE OP. 1056A70 |
||
(Cont..)
Parts & tools for this job For 1998 Fiat Seicento
- PARTExhaust gasketSearch: Fiat Seicento 1998 exhaust gasket
- TOOLPenetrating oilSearch: penetrating oil
- TOOLOBD2 scannerSearch: OBD2 scanner
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.