Subgroup test (page 2 of 2)
- Make
- Fiat
- Model
- Seicento Factory Service Manual
- Year
- 1998–2010
- Section
- Auxiliary units
TestsSubgroup test · page 2 of 2
(Continued)
Make sure the air conditioner is off.
- Start the recycle.
- Select fan 2nd speed (selector indicator upward).
- Completely rotate the temperature selector anti-clockwise setting it in the end position for maximum cold.
- Set the distribution switch in «front» position.
- On the equipment dials read the indicated values.
| Measure | Value | |
|---|---|---|
| - | Air conditioner pressure (bar) | Low pressure A (system off) 5 to 6 |
| High pressure B (system off) 5 to 6 |
- Switch on the air conditioner.
- Check that within 1 minute the pressures on the recharging equipment dials reach the indicated values.
| Measure | Value | |
|---|---|---|
| - | Air conditioner pressure (bar) | Low pressure A (system on) 2.5 to 3 |
| High pressure B (system on) 15 to 16 |
- When the above indicated pressures have been reached check that the engine radiator cooling fan activates. Check that the pressures on the dials show the indicated values.
| Measure | Value | |
|---|---|---|
| - | Air conditioner pressures (bar) | Low pressure A (system on) and fan on 1.5 to 1.8 |
| High pressure B (system on) and fan on 10 to 12 |
Parts & tools for this job For 1998 Fiat Seicento
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Fiat Seicento
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.