Workshop Manuals Factory service & repair Fiat
01 00 General information and technical data02 10 Engine03 18 Clutch04 21 Gearbox and differential05 27 Axle06 33 Braking system07 41 Steering08 44 Suspension and wheels09 50 Auxiliary units10 55 Electrical equipment11 70 Bodywork12 Diagnosis13 Tests14 Wiring diagrams
Fiat Seicento Factory Service Manual (1998-2010)14 · Wiring diagrams
14 · Electrical

Description

Make
Fiat
Model
Seicento Factory Service Manual
Year
1998–2010
Section
E2010 Side and number plate lights › Description
Wiring diagramsDescription

DESCRIPTION

The side lights are switched on at the first position of the stalk unit ring nut, only with the key on RUN.

These can also be switched on removing the key and turning it in the reverse direction - PARK position - keeping the relevant button pressed.

The rear side lights are double wire type, used also by the stop lights.

Together with the side lights the number plate lights and various other internal lights for passenger compartment lighting, clusters and controls are also switched on(these lines are described and illustrated in the diagrams of the components they refer to).

The side lights circuit is protected by two fuses in the junction unit: one for the front right and rear left lights, the other for the left front and rear right lights.

A warning light on the switch control group indicates that the side lights have been switched on.

Parts & tools for this job For 1998 Fiat Seicento

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.