Description

• - DESCRIPTION
• - WIRING DIAGRAM
• - DESCRIPTION OF OPERATION
• - COMPONENTS
• - COMPONENT LAYOUT

DESCRIPTION

The flashing turn lights and hazard lights define the overall dimensions of the car.

The right and left turn indicators are switched on by raising or lowering the relevant lever on the stalk unit.

The hazard lights (right and left side indicators switched on simultaneously) are activated through the red push-button in the centre of the dashboard.

The turn lights are ignition switch power supplied, the hazard lights, for safety reasons, can always be operated, as they are supplied directly from the battery.

The turn lights circuit is protected by a special fuse, whereas another protects the hazard lights circuit; both fuses are located in the junction unit

A warning light on the cluster indicates that the right or left indicator is on.

The hazard lights button, dimly lit with key on RUN, starts to blink when these lights are switched on.

The hazard lights are also activated by the alarm system, that is directly connected on the power supply of the lights.

Connection for a trailer: by replacing the blinking device with a double load device, the connection is activated that indicates through a warning light on the cluster that the right or left indicators have been switched on.