Tailgate - adjust striker and adapt seal if necessary
- Make
- Fiat
- Model
- Stilo Factory Service Manual
- Year
- 2001–2007
- Section
- Tailgate/ › Tailgate - adjust striker and adapt seal if necessary
‹ Prev Tail-gate upper interior panel-r rNext › Tailgate - adjust centring and profile - includes hinge and compartment seal adaptation
Body fittingsTailgate - adjust striker and adapt seal if necessary
Tailgate - adjust striker and adapt seal if necessary
1. Loosen the bolts fixing the tailgate lock striker.
2. Adjust the position of the striker, making use of the slotted openings in the fixing bolts. Permitted adjustment movements are indicated by arrows.
Check that the striker lines up properly with the tailgate lock.
Following adjustment, tighten the tailgate lock striker screws to the specified torque.
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| Bolt | TAIL-GATE LOCK STRIKER | M6 | 0.78 |
‹ Prev Tail-gate upper interior panel-r rNext › Tailgate - adjust centring and profile - includes hinge and compartment seal adaptation
Parts & tools for this job For 2001 Fiat Stilo
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Fiat touch up paint
- PARTPanel clip assortmentSearch: Fiat panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.