WHEEL GEOMETRY (unladen vehicle) (*)
- Make
- Fiat
- Model
- Stilo Factory Service Manual
- Year
- 2001–2007
- Section
- Project description and specifications › WHEEL GEOMETRY (unladen vehicle) (*)
SpecificationsWHEEL GEOMETRY (unladen vehicle) (*)
WHEEL GEOMETRY (unladen vehicle) (*)
| 1.2 16V | 1.4 16V | 1.6 16V | 1.8 16V | 2.4 20V | ||
|---|---|---|---|---|---|---|
| Front suspension | Camber (angles cannot be adjusted) | -40'±30' | -40'±30' | -40'±30' | -40'±30' | -40'±30' |
| Caster (angles cannot be adjusted) | 2˚53'±30' | 2˚53'±30' | 2˚53'±30' | 2˚53'±30' | 2˚53'±30' | |
| Toe-in | -1±1 mm | -1±1 mm | -1±1 mm | -1±1 mm | -1±1 mm | |
| Front wheel offset (1) | 0° | 0° | 0° | 0° | 0° | |
| Rear suspension | Camber (angles cannot be adjusted) | -55'±30' | -55'±30' | -55'±30' | -55'±30' | -55'±30' |
| Caster (angles cannot be adjusted) | ||||||
| Toe-in | -3±2 mm | -3±2 mm | -3±2 mm | -3±2 mm | -3±2 mm | |
| Rear wheel thrust angle (1) | 0° | 0° | 0° | 0° | 0° | |
(1) Angular values that cannot be adjusted used for the correct alignment of the vehicle
(*) With tyres inflated to the recommended pressure, vehicle in running order and with full fuel tank.
Parts & tools for this job For 2001 Fiat Stilo
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.