Steering control shaft joints - tighten screws
- Make
- Fiat
- Model
- Stilo Factory Service Manual
- Year
- 2001–2007
- Section
- Steering control and linkage › Steering control shaft joints - tighten screws
‹ Prev Steering wheel - r+r for replacement or checksNext › Intermediate shaft connected to steering box - r.r.
SteeringSteering control shaft joints - tighten screws
Steering control shaft joints - tighten screws
1. Use two wrenches to tighten the bolt and nut (1) of the element fastening steering coupling (1b) to the specified torque.
The bolt for the element fixing the steering shaft coupling should fit in the splining on the steering box pinion.
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| 1a | Bolt | STEERING SHAFT JOINT FASTENERS | M8 | 3.5 |
‹ Prev Steering wheel - r+r for replacement or checksNext › Intermediate shaft connected to steering box - r.r.
Parts & tools for this job For 2001 Fiat Stilo
- TOOLTie rod end toolSearch: tie rod end puller
- TOOLBall joint separatorSearch: ball joint separator
- FLUIDPower steering fluidSearch: Fiat power steering fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.