Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Ulysse Factory Service Manual (2002-2010)22 · Fault diagnosis
22 · Diagnostics

Engine coolant overheating warning light not working

Make
Fiat
Model
Ulysse Factory Service Manual
Year
2002–2010
Section
Instrument panel › Engine coolant overheating warning light not working
Fault diagnosisEngine coolant overheating warning light not working

ENGINE COOLANT OVERHEATING WARNING LIGHT NOT WORKING

STEPOPERATIONS TO BE CARRIED OUTTEST RESULTS
1BATTERY VOLTAGE CHECKALL OKPROBLEMS ENCOUNTEREDACTION
Check that the battery voltage is correct.Move on to StepBattery voltage not correct.Restore the correct voltage.
2CHECK USING DIAGNOSTIC EQUIPMENTALL OKPROBLEMS ENCOUNTEREDACTION
Connect the Examiner diagnostic equipment and check, in the Instrument Panel Node ambient, that there are no errors and that the parameters are present.Move on to Step1. Impossible to connect with the control unit.Move on to Step
2. Errors detectedMove on to Step
3ERRORS CHECKALL OKPROBLEMS ENCOUNTEREDACTION

Check for the presence of one or more of the following errors using the Examiner in the Instrument Panel Node ambient:

  • No communication with the BSI
  • Communication error with instrument panel
  • VAN line error
  • Control unit broken
  • Engine coolant temperature gauge error
Move on to Step1. No communication with Body Computer error detected and/or VAN CONfor. network error and/or communication error with the instrument panel and/or control unit broken.Move on to Step
2. Engine coolant temperature gauge errorMove on to Step
4ACTIVE DIAGNOSIS CHECKALL OKPROBLEMS ENCOUNTEREDACTION

With the Examiner in the Instrument Panel Node ambient check that the function in question is correctly activated in Active Diagnosis.

  • Autotest
Move on to StepThe component in question is not activated. It is not operated by the active diagnosis.Replace the Instrument Panel control unit.
6CHECK ON CORRECT OPERATIONALL OKPROBLEMS ENCOUNTEREDACTION
Check that the fault is no longer present

Parts & tools for this job For 2002 Fiat Ulysse

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.