22 · Diagnostics

Engine oil level not working

Make: Fiat
Model: Ulysse Factory Service Manual
Year: 2002–2010
Section: Instrument panel › Engine oil level not working

‹ Prev Minimum engine oil pressure warning light not working Next › Instrument lights / not working

Fault diagnosisEngine oil level not working

ENGINE OIL LEVEL NOT WORKING

The engine oil level function can be enabled/disabled by changing the configuration inside the Milometer Warning Lights Node on the steering column.

STEP	OPERATIONS TO BE CARRIED OUT	TEST RESULTS
0	PRELIMINARY CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	With the Examiner in the Milometer Warning Lights ambient, check that the configuration of the function in question is correct.	Move on to Step	Configuration not correct.	Restore the correct configuration.
1	BATTERY VOLTAGE CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check that the battery voltage is correct.	Move on to Step	Battery voltage not correct.	Restore the correct voltage.
2	CHECK USING DIAGNOSTIC EQUIPMENT	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Connect the Examiner diagnostic equipment and check, in the BTO Instrument Panel Node ambient, that there are no errors and that the parameters are present.	Move on to Step	1. Impossible to connect with the control unit.	Move on to Step
		Move on to Step	2. Errors detected	Move on to Step
3	ERRORS CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check for the presence of one or more of the following errors using the Examiner in the Milometer Warning Lights Node ambient: No communication with the BSI Communication with milometer warning lights error VAN line error Control unit broken	Move on to Step	No communication with Body Computer error detected and/or VAN CONfor. network error and/or communication error with the instrument panel and/or control unit broken.	Move on to Step
4	ACTIVE DIAGNOSIS CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	With the Examiner in the Milometer Warning Lights Node ambient check that the function in question is correctly activated in Active Diagnosis. Autotest Oil level gauge	Move on to Step	The component in question is not activated. It is not operated by the active diagnosis.	Replace the Milometer Warning Lights Node control unit.
6	SENSOR CHECK	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check the operation of the submerged sensor, in particular the control device for the engine oil level signal and the wiring.	Move on to Step	1. Engine oil pressure device faulty.	1. Replace the engine oil pressure device.
		Move on to Step	2. Gauge wiring and body computer faulty.	2. Repair wiring.
7	CHECK ON CORRECT OPERATION	ALL OK	PROBLEMS ENCOUNTERED	ACTION
	Check that the fault is no longer present

‹ Prev Minimum engine oil pressure warning light not working Next › Instrument lights / not working

Parts & tools for this job For 2002 Fiat Ulysse

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.