Ford Workshop Service and Repair Manuals
HOME
FEATURES
MENU
INDEX
ABOUT US
In-vehicle Repair|Removal >
< Transmission Range (TR) Sensor
Cougar 1999 (08.1998-01.2001)
Mechanical Repairs
3 Powertrain
307 Automatic Transmission-Transaxle / 307-01 Automatic Transmission-Transaxle
Description and Operation
Diagnosis and Testing
General Procedures
In-vehicle Repair
Output Shaft Speed (OSS) Sensor
Automatic Transmission/Transaxle - Output Shaft Speed (OSS) Sensor
Cougar 1999 (08/1998-01/2001)
In-vehicle Repair
Materials
Name
Specification
Automatic transmission fluid
ESP-M2C166-H
Petroleum jelly
SM-1C115-A
Removal
Raise and support the vehicle. For additional information, refer to Section
100-02 Jacking and Lifting
.
Disconnect the output shaft speed (OSS) sensor electrical connector (colored black).
Remove the OSS sensor.
Allow the oil to drain into a suitable container.
Discard the O-ring seal.
Installation
NOTE:
Install a new OSS sensor O-ring seal.
Install the OSS sensor.
Lubricate the O-ring seal with
petroleum jelly
.
Connect the OSS sensor electrical connector (colored black).
Lower vehicle.
Start the engine and move the selector lever through all of the ranges, allowing sufficient time for each position to engage.
Engage the selector lever in the "P" (park) position.
Check the transmission fluid level.
For additional information, refer to
Preliminary Inspection
in this section.
Add
automatic transmission fluid
, if necessary.
Mechanical Repairs
3 Powertrain
307 Automatic Transmission-Transaxle / 307-01 Automatic Transmission-Transaxle
Description and Operation
Diagnosis and Testing
General Procedures
In-vehicle Repair
Output Shaft Speed (OSS) Sensor
In-vehicle Repair|Removal >
< Transmission Range (TR) Sensor