Econoline E350 1 Ton V8-5.4L Prop SOHC VIN Z (1998)
7. Remove the two axle shafts.
CAUTION: Do not damage the inner wheel bearing oil seal.
INSTALLATION
1. Lubricate the lip of the inner wheel bearing oil seal.
-
Use Premium Long-Life Grease XG-1-C or equivalent meeting Ford specification ESA-M1C75-B.
2. Install the two axle shafts.
CAUTION: Do not damage the inner wheel bearing oil seal.
3. Install the U-washers.
1. Position the two u-washer on the button ends of the axle shafts .