ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

In-vehicle Repair|Disassembly > < Crankshaft Rear Seal
Engine - 2.4L Duratorq-TDCi (Puma) Diesel - Engine Transit 2006.5 (04/2006-)

Removal

Special Tool(s)

303-122
Lifting Bracket, Engine
General Equipment
Hose clamp remover/installer
Hydraulic jib crane
Trolley jack
Vehicle/axle stands
Worldwide Diagnostic System (WDS)
  1. Remove the following items:
    1. Air cleaner
      Refer to: Air Cleaner - 2.3L Duratec-HE (MI4)/2.4L Duratorq-TDCi (Puma) Diesel/3.2L Duratorq-TDCi (Puma) Diesel (303-12 Intake Air Distribution and Filtering, Removal and Installation).
    1. Front Bumber
      Refer to: Front Bumper (501-19 Bumpers, Removal and Installation).
    1. Condenser Core
      Refer to: Condenser Core (412-03A Air Conditioning, Removal and Installation).
    1. Radiator
      Refer to: Radiator (303-03 Engine Cooling, Removal and Installation).
    1. Power Steering Pump
      Refer to: Power Steering Pump - 2.4L Duratorq-TDCi (Puma) Diesel/3.2L Duratorq-TDCi (Puma) Diesel (211-02 Power Steering, Removal and Installation).
    1. Accessory Drive Belt
      Refer to: Accessory Drive Belt - 2.4L Duratorq-TDCi (Puma) Diesel/3.2L Duratorq-TDCi (Puma) Diesel (303-05 Accessory Drive, Removal and Installation).
    1. Catalytic Converter
      Refer to: Catalytic Converter - 2.4L Duratorq-TDCi (Puma) Diesel/3.2L Duratorq-TDCi (Puma) Diesel (309-00 Exhaust System, Removal and Installation).
  1. Disconnect the battery ground cable.
    Refer to: Battery Disconnect and Connect (414-01 Battery, Mounting and Cables, General Procedures).
  1. Within the datalogger function of WDS, check that the fuel pressure has dropped to zero and that the fuel temperature has either reached ambient temperature or is below 30ºC whichever is the greater.

  1. General Equipment: Hose clamp remover/installer

  1. General Equipment: Hose clamp remover/installer

  1. General Equipment: Vehicle/axle stands

  1. General Equipment: Trolley jack

  1. Push the vehicle back.

  1. Install the special tool.
    Special Tool(s): 303-122
    General Equipment: Hydraulic jib crane

In-vehicle Repair|Disassembly > < Crankshaft Rear Seal