Sprinter 2500 V6-3.0L DSL Turbo (2008)
11. Remove the oil housing adapter (1).
12. Remove the rear engine lift bracket at the intake manifold.
13. Remove the front engine lift bracket at the cylinder heads.
14. Remove the left fuel rail and lines.See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Injector/Service and Repair/Removal and
Replacement/Removal
15. Remove the right fuel rail and lines.See: Powertrain Management/Fuel Delivery and Air Induction/Fuel Injector/Service and Repair/Removal and
Replacement/Removal
16. Disconnect the engine harness (2) and position aside.
17. Remove the swirl port actuator (3).