Sprinter 2500 V6-3.0L DSL Turbo (2008)
18. Remove the heater hose at the EGR valve.
19. Remove the EGR control assembly.
20. Remove the coolant hose at the thermostat housing.
21. Remove the glow plug module.
22. Remove the throttle control assembly.
23. Remove the intake manifold.
24. Loosen the EGR cooler bolts to gain access to the swirl valve linkage clips.
25. Remove the swirl valve linkage clips (2).
Installation
INSTALLATION
1. Install the round clips (2) into the swirl valve linkage.
2. Clean the intake manifold sealing surfaces.
3. Install new intake manifold gaskets.
