Hombre XS Space Cab L4-2.2L CPC (1997)
4. Remove the shaft seal retainer ring, using snap ring pliers J 5403.
5. Thoroughly clean inside of compressor neck area surrounding the shaft, the exposed portion of the seal, the retainer ring groove and the shaft
itself. Any dirt or foreign material getting into compressor may cause damage.
6. Fully engage the knurled tangs of Seal Remover- Installer J 23128-A into the recessed portion of the Seal by turning the handle clockwise.
Remove the Seal from the compressor with a rotary-pulling motion. Discard the seal. The handle must be hand- tightened securely. Do not use a
wrench or pliers.