Hombre XS Space Cab L4-2.2L CPC (1997)
7. Remove and discard the seal seat O-ring from the compressor neck using O-ring remover J 9553-1.
8. Recheck the shaft and inside of the compressor neck for dirt or foreign material and be sure these areas are perfectly clean before installing new
parts.
Clean
-
Thoroughly clean O-ring seal groove in front head.
NOTE: Seals should not be re-used. Always use a new specification service seal on rebuild. Be sure that the seal to be installed is not scratched
or damaged in anyway. Make sure that the seal seat and seal are free of lint and dirt that could darnage the seal surface or prevent sealing.
Install or Connect
