Hydraulic tappets (all) - r.r.
- Make
- Lancia
- Model
- Thesis Factory Service Manual
- Year
- 2002–2009
- Section
- Timing system › Hydraulic tappets (all) - r.r.
‹ Prev Hydraulic tappet (one) - Replace with camshaft housing removedNext › CAMSHAFTS in camshaft housing RR includes camshaft housing replacement.
EngineHydraulic tappets (all) - r.r.
HYDRAULIC TAPPETS (ALL) - R.R.
- Carry out the operation described in the cycle on all the hydraulic tappets:
See in Op. 1036H55 Hydraulic tappet (one) - Replace with camshaft housing removed
Removing
- Remove the hydraulic tappets using a suitable magnetized tool.
Refitting
- Lubricate with the hydraulic tappets with engine oil, then place them in their housings.
‹ Prev Hydraulic tappet (one) - Replace with camshaft housing removedNext › CAMSHAFTS in camshaft housing RR includes camshaft housing replacement.
Parts & tools for this job For 2002 Lancia Thesis
- PARTEngine gasket setSearch: Lancia Thesis 2002 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.