OIL SEALS FOR LEFT CYLINDER HEAD CAMSHAFTS - REPLACE

Operation 1036E54 · CAMSHAFTS (2) IN CYLINDER HEADS (2)

3.0 V6, 3.2 V6

Removing

- Open the boot, remove the cover on the left hand side and disconnect the negative battery lead.

See in Op. 4450B04 Right FRONT WHEEL (one) - R.R.

See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.

See in Op. 7055B64 Engine compartment DUST SEAL in front wheel arch (one), left or right - R.R.

See in Op. 7055B42 FRONT WHEEL ARCH LINER (one), left or right - R.R.

See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.

See in Op. 1092G10 Engine components single drive BELT - R.R.

See in Op. 1016A42 LEFT CYLINDER HEAD IGNITION COIL COVER - R.R.

See in Op. 1072B50 Air CHAMBER - R.R.

See in Op. 5510C14 Ignition COILS - R.R.

See in Op. 1016A36 Left and right TAPPET COVERS - R.R.

See in Op. 1088B10 Engine coolant SUPPLY RESERVOIR - R.R.

See in Op. 1048A21 AIR INLET HOSE FROM INTAKE TO FILTER - R.R.

See in Op. 1048A28 vacuum air circuit resonator pipe - r+r

See in Op. 1008C10 Power unit REACTION ROD - Replace

See in Op. 1016A42 LEFT CYLINDER HEAD IGNITION COIL COVER - R.R.

See in Op. 1048A11 COMPLETE AIR FILTER -R.R.

See in Op. 1092A10 Crankshaft PULLEY - R.R. for versions with air conditioner

See in Op. 1088C24 Water pump PULLEY - R.R. with timing belt removed

See in Op. 1032B10 TOOTHED timing BELT - R.R. for timing adjustment or replacement

See in Op. 1032B55 LEFT HEAD TOOTHED DRIVEN PULLIES - R.R. FOR VERSIONS WITH AIR CONDITIONING

See in Op. 1032C32 TIMING BELT FIXED TENSIONER - R.R.

- Undo the bolts and remove the left rear timing belt guard.

1. Undo the bolts (1a) and remove the camshaft caps (1b) for the left cylinder head.

2. Remove the front oil seals for the left cylinder head camshafts.

Refitting

- Fit the camshaft caps and secure them tightening the bolts to the recommended torque.

- Fit the front oil seals (1a) for the left cylinder head camshafts using the tool (1b).

See in Op. 1032C32 TIMING BELT FIXED TENSIONER - R.R.

See in Op. 1032B55 LEFT HEAD TOOTHED DRIVEN PULLIES - R.R. FOR VERSIONS WITH AIR CONDITIONING

See in Op. 1032B10 TOOTHED timing BELT - R.R. for timing adjustment or replacement

See in Op. 1088C24 Water pump PULLEY - R.R. with timing belt removed

See in Op. 1092A10 Crankshaft PULLEY - R.R. for versions with air conditioner

See in Op. 1048A11 COMPLETE AIR FILTER -R.R.

See in Op. 1016A42 LEFT CYLINDER HEAD IGNITION COIL COVER - R.R.

See in Op. 1008C10 Power unit REACTION ROD - Replace

See in Op. 1048A28 vacuum air circuit resonator pipe - r+r

See in Op. 1048A21 AIR INLET HOSE FROM INTAKE TO FILTER - R.R.

See in Op. 1088B10 Engine coolant SUPPLY RESERVOIR - R.R.

See in Op. 1016A36 Left and right TAPPET COVERS - R.R.

See in Op. 5510C14 Ignition COILS - R.R.

See in Op. 1072B50 Air CHAMBER - R.R.

See in Op. 1016A42 LEFT CYLINDER HEAD IGNITION COIL COVER - R.R.

See in Op. 1092G10 Engine components single drive BELT - R.R.

See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.

See in Op. 7055B42 FRONT WHEEL ARCH LINER (one), left or right - R.R.

See in Op. 7055B64 Engine compartment DUST SEAL in front wheel arch (one), left or right - R.R.

See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.

See in Op. 4450B04 Right FRONT WHEEL (one) - R.R.

- Connect the negative battery lead, then close the boot.

- Remove the vehicle from the lift.

- [0010T21]

2.0 TB, 2.4 20V

- Operation not available