Workshop Manuals Factory service & repair Lancia
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Service news bulletins24 Special tools
Lancia Thesis Factory Service Manual (2002-2009)08 · Engine
08 · Engine

TOOTHED DRIVEN PULLEY (one) - R.R.

Make
Lancia
Model
Thesis Factory Service Manual
Year
2002–2009
Section
Timing system › TOOTHED DRIVEN PULLEY (one) - R.R.
EngineTOOTHED DRIVEN PULLEY (one) - R.R.

TOOTHED DRIVEN PULLEY (one) - R.R.

Operation 1032B52 · BELT-DRIVEN TIMING SYSTEM

2.4 JTD 20V

Removing

See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.

See in Op. 4450B04 Right FRONT WHEEL (one) - R.R.

See in Op. 7055B42 FRONT WHEEL ARCH LINER (one), left or right - R.R.

See in Op. 7055B64 Engine compartment DUST SEAL in front wheel arch (one), left or right - R.R.

See in Op. 1016A10 SOUND-PROOFING COVER - R.R.

See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.

See in Op. 1048B44 RIGID air supply PIPE from heat exchanger to intake manifold - R.R.

See in Op. 1048A56 UPPER RESONATOR - R.R.

See in Op. 1092G10 Engine components single drive BELT - R.R.

See in Op. 1092G21 Engine components single belt FIXED TENSIONER - R.R. with belt removed

See in Op. 1092A10 Crankshaft PULLEY - R.R.

See in Op. 1032D12 Timing system protective COVER(S) - R.R.

See in Op. 1032B10 TOOTHED timing BELT - R.R. for timing adjustment or replacement

See in Op. 1032B40 TOOTHED DRIVEN PULLEY (one) - R.R. with timing belt removed

Refitting

See in Op. 1032B40 TOOTHED DRIVEN PULLEY (one) - R.R. with timing belt removed

See in Op. 1032B10 TOOTHED timing BELT - R.R. for timing adjustment or replacement

See in Op. 1032D12 Timing system protective COVER(S) - R.R.

See in Op. 1092A10 Crankshaft PULLEY - R.R.

See in Op. 1092G21 Engine components single belt FIXED TENSIONER - R.R. with belt removed

See in Op. 1092G10 Engine components single drive BELT - R.R.

See in Op. 1048A56 UPPER RESONATOR - R.R.

See in Op. 1048B44 RIGID air supply PIPE from heat exchanger to intake manifold - R.R.

See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.

See in Op. 1016A10 SOUND-PROOFING COVER - R.R.

See in Op. 7055B64 Engine compartment DUST SEAL in front wheel arch (one), left or right - R.R.

See in Op. 7055B42 FRONT WHEEL ARCH LINER (one), left or right - R.R.

See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.

See in Op. 4450B04 Right FRONT WHEEL (one) - R.R.

- Top up the engine coolant following the instructions in the description:

See in Op. 0010T21 ENGINE COOLANT - Check density and top up if necessary

2.4 JTD 10V

Removing

See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.

See in Op. 1016A10 SOUND-PROOFING COVER - R.R.

See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.

See in Op. 4450B04 Right FRONT WHEEL (one) - R.R.

See in Op. 7055B42 FRONT WHEEL ARCH LINER (one), left or right - R.R.

See in Op. 7055B64 Engine compartment DUST SEAL in front wheel arch (one), left or right - R.R.

See in Op. 1092G10 Engine components single drive BELT - R.R.

See in Op. 1032D12 Timing system protective COVER(S) - R.R.

See in Op. 1032B10 TOOTHED timing BELT - R.R. for timing adjustment or replacement

See in Op. 1032B40 TOOTHED DRIVEN PULLEY (one) - R.R. with timing belt removed

Refitting

See in Op. 1032B40 TOOTHED DRIVEN PULLEY (one) - R.R. with timing belt removed

See in Op. 1032B10 TOOTHED timing BELT - R.R. for timing adjustment or replacement

See in Op. 1032D12 Timing system protective COVER(S) - R.R.

See in Op. 1092G10 Engine components single drive BELT - R.R.

See in Op. 7055B64 Engine compartment DUST SEAL in front wheel arch (one), left or right - R.R.

See in Op. 7055B42 FRONT WHEEL ARCH LINER (one), left or right - R.R.

See in Op. 4450B04 Right FRONT WHEEL (one) - R.R.

See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.

See in Op. 1016A10 SOUND-PROOFING COVER - R.R.

See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.

2.0 TB, 2.4 20V

Removing

- Position the vehicle on a lift.

- Open the boot, remove the cover on the left hand side and disconnect the negative battery lead.

See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.

See in Op. 4450B04 Right FRONT WHEEL (one) - R.R.

- Raise the vehicle on the lift.

See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.

See in Op. 7055B42 FRONT WHEEL ARCH LINER (one), left or right - R.R.

See in Op. 7055B64 Engine compartment DUST SEAL in front wheel arch (one), left or right - R.R.

2.4 20V

See in Op. 1048A28 vacuum air circuit resonator pipe - r+r

See in Op. 1048A21 AIR INLET HOSE FROM INTAKE TO FILTER - R.R.

See in Op. 1048A23 Cold AIR INTAKE for air filter - R.R.

See in Op. 1048A10 COMPLETE AIR FILTER -R.R.

2.0 TB

See in Op. 1048A21 AIR INLET HOSE FROM INTAKE TO FILTER - R.R.

See in Op. 1048A50 air inlet pipe to turbocharger - r + r

See in Op. 1048A10 COMPLETE AIR FILTER -R.R.

2.0 TB, 2.4 20V

See in Op. 1016A40 Ignition COIL COVER on cylinder head - R.R.

See in Op. 1092G10 Engine components single drive BELT - R.R.

See in Op. 1092A10 Crankshaft PULLEY - R.R. for versions with air conditioner

See in Op. 1032D12 Timing system protective COVER(S) - R.R.

See in Op. 1032B10 TOOTHED timing BELT - R.R. for timing adjustment or replacement

See in Op. 1032B40 TOOTHED DRIVEN PULLEY (one) - R.R. with timing belt removed

Refitting

See in Op. 1032B40 TOOTHED DRIVEN PULLEY (one) - R.R. with timing belt removed

See in Op. 1032B10 TOOTHED timing BELT - R.R. for timing adjustment or replacement

See in Op. 1032D12 Timing system protective COVER(S) - R.R.

See in Op. 1092A10 Crankshaft PULLEY - R.R. for versions with air conditioner

See in Op. 1092G10 Engine components single drive BELT - R.R.

See in Op. 1016A40 Ignition COIL COVER on cylinder head - R.R.

2.4 20V

See in Op. 1048A10 COMPLETE AIR FILTER -R.R.

See in Op. 1048A23 Cold AIR INTAKE for air filter - R.R.

See in Op. 1048A21 AIR INLET HOSE FROM INTAKE TO FILTER - R.R.

See in Op. 1048A28 vacuum air circuit resonator pipe - r+r

2.0 TB

See in Op. 1048A10 COMPLETE AIR FILTER -R.R.

See in Op. 1048A50 air inlet pipe to turbocharger - r + r

See in Op. 1048A21 AIR INLET HOSE FROM INTAKE TO FILTER - R.R.

2.0 TB, 2.4 20V

See in Op. 7055B64 Engine compartment DUST SEAL in front wheel arch (one), left or right - R.R.

See in Op. 7055B42 FRONT WHEEL ARCH LINER (one), left or right - R.R.

- Lower the vehicle on the lift.

See in Op. 4450B04 Right FRONT WHEEL (one) - R.R.

- Connect the negative battery lead.

See in Op. 0010T20 Engine REFRIGERANT FLUID - Change

See in Op. 7055B54 PROTECTION/GUARD under engine - R.R.

See in Op. 7040D50 ENGINE COMPARTMENT UPPER SOUND INSULATION SHIELD - R.R.

- Remove the vehicle from the lift.

Parts & tools for this job For 2002 Lancia Thesis

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.