Workshop Manuals Factory service & repair Lancia
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Service news bulletins24 Special tools
Lancia Thesis Factory Service Manual (2002-2009)22 · Fault diagnosis
22 · Diagnostics

Number plate lights not working

Make
Lancia
Model
Thesis Factory Service Manual
Year
2002–2009
Section
Lights › Number plate lights not working
Fault diagnosisNumber plate lights not working

NUMBER PLATE LIGHTS NOT WORKING

the number plate lights are switched on directly by the Body Computer Node when the Side Lights on or Parking Lights (four lights) on signals are received.

STEPOPERATIONS TO BE CARRIED OUTTEST RESULTS
1CHECK USING DIAGNOSTIC EQUIPMENT.ALL OKPROBLEMS ENCOUNTEREDACTION

Connect the Examiner diagnostic equipment to the diagnostic socket and check the following at the Body Computer Node:

  • that there are no faults
Move on to StepNo. plate lights short circuitd to earth or open circuitMove on to Step
2ELECTRICAL SYSTEM CHECK.ALL OKPROBLEMS ENCOUNTEREDACTION

Check the condition of the bulbs.

  • Check the continuity and the insulation of the wiring between the intermediate connection and the number plate lights connector
  • Check the continuity and the insulation of the wiring between the Body Computer Node and the intermediate connection

    (Wiring Diagram ) E2010 SIDE LIGHTS/NUMBER PLATE LIGHT

Move on to Step1. Bulbs burnt out1. Replace the bulbs
2. Connection between intermdiate connection and no. plate lights connector broken

2. Restore the electrical connection

(Wiring Diagram ) E2010 SIDE LIGHTS/NUMBER PLATE LIGHT

3. Connection between Body Computer Node and intermediate connection broken

3. Restore the electrical connection

(Wiring Diagram ) E2010 SIDE LIGHTS/NUMBER PLATE LIGHT

3CHECK USING DIAGNOSTIC EQUIPMENT.ALL OKPROBLEMS ENCOUNTEREDACTION
Keeping the Examiner diagnostic equipment connected, check the operation of the no. plate light bulbs in active diagnosisMove on to StepNo lights come on

Replace body computer

See in Op. 5505A32 BODY COMPUTER - R.R.

4CHECK ON CORRECT OPERATIONALL OKPROBLEMS ENCOUNTEREDACTION
Check that the fault is no longer present

Parts & tools for this job For 2002 Lancia Thesis

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.