Workshop Manuals Factory service & repair Lancia
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Service news bulletins24 Special tools
Lancia Thesis Factory Service Manual (2002-2009)22 · Fault diagnosis
22 · Diagnostics

One headlamp remains immobile in any position

Make
Lancia
Model
Thesis Factory Service Manual
Year
2002–2009
Section
Lights › One headlamp remains immobile in any position
Fault diagnosisOne headlamp remains immobile in any position

ONE HEADLAMP REMAINS IMMOBILE IN ANY POSITION

The alignment of the headlamps is corrected automatically and continuously by a Headlamp Alignment Corrector (C.A.F.) control unit;

the correction of the headlamp alignment is activated by switching the dipped headlamps on;

the C.A.F. control unit has an autodiagnostic function and, if there are errors in the various components, it controls the warning light (matrix message) in the Instrument Panel Node.

STEPOPERATIONS TO BE CARRIED OUTTEST RESULTS
1CHECK USING DIAGNOSTIC EQUIPMENT.ALL OKPROBLEMS ENCOUNTEREDACTION

Connect the Examiner diagnostic equipment to the diagnostic socket and check the following at the Headlamp Alignment Corrector control unit:

  • that there are no faults
Move on to StepPresence of faultsContinue following the instructions for the diagnostic equipment
2ELECTRICAL SYSTEM CHECKALL OKPROBLEMS ENCOUNTEREDACTION
Check the continuity/insulation between:C.A.F. control unit and input connect at left or right front healampMove on to StepElectrical connection interrupted

Restore the electrical connection

(Wiring Diagram ) E3080 HEADLAMP ALIGNMENT CORRECTOR

3CHECK ON CONDITION OF ADJUSTMENT MOTOR AND MECHANICAL CONNECTION WITH INTERNAL PARABOLA.ALL OKPROBLEMS ENCOUNTEREDACTION
Remove the headlamp from its housing, dismantle it at the bench and check the condition of the motor and the headlamp internal mechanical connectionsMove on to StepMotor or mechanical connections damaged

Replace the headlamp or the motor

See in Op. 5540C40 MOTOR (one), left or right for correcting/aligning gas discharge light CLUSTERS - R.R.

4CHECK ON CORRECT OPERATION.ALL OKPROBLEMS ENCOUNTEREDACTION
Check that the fault is no longer presentFault persists

Replace the headlamp alignment corrector control unit

See in Op. 5540C50 Gas discharge LIGHT CLUSTER CORRECTION/ALIGNMENT CONTROL UNIT - R.R.

Parts & tools for this job For 2002 Lancia Thesis

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.