The follow me home function is not activated
- Make
- Lancia
- Model
- Thesis Factory Service Manual
- Year
- 2002–2009
- Section
- Lights › The follow me home function is not activated
THE FOLLOW ME HOME FUNCTION IS NOT ACTIVATED
The "Follow me home" function is not activated; the main beam headlamps and the dipped headlamps work normally;
The "Follow me home" function should be activated by the user within two minutes of the "key off" by operating the steering column switch unit in the headlamp flasher mode and the exterior lights control in the [PARK] or [0] position
If the user keeps the flasher lever in the flasher position for more than two seconds the "Follow me home" function will be deactivated.
the lights which come through the "Follow me home" function are the dipped headlamps
the time set by the user will be shown on the matrix that can be reconfigured
The function should be "set" by the CONNECT.
| STEP | OPERATIONS TO BE CARRIED OUT | TEST RESULTS | ||
|---|---|---|---|---|
| 0 | PRELIMINARY CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
Check:
| Move on to Step | 1. Follow me home function not activated. | 1. Activate the "Follow me home" function at the CONNECT | |
| 2. Flasher not working | Move on to Step | |||
| 1 | STEERING COLUMN SWITCH UNIT CHECK | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
Check the operation of the steering column switch unit in the headlamp flasher position (Wiring Diagram ) E2012 MAIN BEAMS | Move on to Step | Steering column switch unit faulty | Replace the steering column switch unit | |
| 2 | CHECK ON CORRECT OPERATION | ALL OK | PROBLEMS ENCOUNTERED | ACTION |
| Check that the fault is no longer present | Fault persists | Replace body computer | ||
Parts & tools for this job For 2002 Lancia Thesis
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Lancia Thesis
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.