Workshop Manuals Factory service & repair Lancia
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Service news bulletins24 Special tools
Lancia Thesis Factory Service Manual (2002-2009)19 · Wiring diagrams and electrical functions
19 · Electrical

Additional heater description

Make
Lancia
Model
Thesis Factory Service Manual
Year
2002–2009
Section
Climate control system › Additional heater description
Wiring diagrams and electrical functionsAdditional heater description

ADDITIONAL HEATER DESCRIPTION

2.4 JTD 10V, 2.4 JTD 20V

Description

The Webasto additional heater is an autonomous heating device for the vehicle interior that works either with the ignition switched on (+15) or off; this device makes it possible to:

  • pre-heat the engine coolant allowing smoother starting and reducing the time it takes for the engine to warm up (especially in particularly harsh climatic conditions);
  • the heating of the passenger compartment for improved comfort;
  • the removal of any ice or condensation from the windows.

The system, which basically consists of a heating control unit, an electric fuel metering pump, fuel supply pipes, exhaust pipes and an integrated electric pump for the circulation of the coolant, interfaces with the vehicle cooling, fuel supply and electrical systems: its operation is dependent on the temperature of the engine coolant, the presence of fuel in the tank and commands coming from the climate control system control unit.

The Webasto additional heater has three different operating modes:

  • in Parking Heater mode, with the ignition switched off, a special command (from the timer or remote control) pre-heats the engine coolant and then the passenger compartment in advance of the engine being switched on; the info-telematic control unit can be used to programme the duration of the pre-heating and the time the heater should be switched on and off (timer);
  • in Rest mode, with the ignition switched off, the thermal energy of the engine coolant is used to heat the passenger comparment (straight after the vehicle is switched off) and thereby maintain the internal temperature;
  • in Additional Heater mode, with the ignition switched on, the heater comes on when the effective temperature in the passenger compartment is lower than that set by the info-telematic control unit.

Whichever operating mode is set, the device can be switched off using a manual control.

The Webasto additional heater control unit manages its own diagnostic signal

See E8010 DIAGNOSTIC MULTIPLE CONNECTOR

Parts & tools for this job For 2002 Lancia Thesis

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.