Accessories and conversions special service tools

ACCESSORIES AND CONVERSIONS SPECIAL SERVICE TOOLS

DO NOT FIT unapproved accessories or conversions, The use of approved special service tools is as they could affect the safety of the vehicle. important. They are essential if service operations are Land Rover will not accept liability for death, personal to be carried out efficiently, and safely. Where special injury, or damage to property which may occur as a tools are specified, only these tools should be used direct result of the fitting of non-approved conversions to avoid the possibility of personal injury or to the vehicle. damage to the components. Also, the amount of time which they save can be considerable.

Special tools bulletins will be issued periodically giving details of new tools as they are introduced.

WHEELS AND TYRES

All orders and enquiries from the United Kingdom

WARNING: DO NOT replace the road

should be sent direct to V. L. Churchill. Overseas

wheels with any type other than genuine

orders should be placed with the local V. L. Churchill

Land Rover wheels which are designed for

distributor, where one exists. Countries where there is

multi-purpose on and off road use and have very

no distributor may order direct from:

important relationships with the proper operation

V. L. Churchill Limited,

of the suspension system and vehicle handling.

PO Box 3,

Replacement tyres must be of the make and sizes

Daventry, Northants,

recommended for the vehicle, and all tyres must

England, NN11 4NF.

be the same make, ply rating and tread pattern.

The tools recommended in this Workshop Manual are listed in a multi-language illustrated catalogue, obtainable from: STEAM CLEANING Messers. V. L. Churchill at the above address, or from: To prevent consequential rusting, any steam cleaning Land Rover Publications, within the engine bay MUST be followed by careful Character Mailing, re-waxing of the metallic components affected. Heysham Road, Particular attention must be given to the steering Bootle, column, engine coolant pipes and hose clips. Merseyside, L70 1JL

SPECIFICATION COPYRIGHT

The specification details and instructions set out in  1998 Rover Group Limited this Manual apply only to a range of vehicles and not to any one. For the specification of a particular vehicle All rights reserved. No part of this publication may be purchasers should consult their Dealer. produced, stored in a retrieval system or transmitted The Manufacturer reserves the right to vary in any form, electronic, mechanical, recording or other specifications with or without notice, and at such times means without prior written permission of Rover and in such manner as it thinks fit. Major as well as Group. minor changes may be involved in accordance with the Manufacturer’s policy of constant product improvement.

Whilst every effort is made to ensure the accuracy of the particulars contained in this Manual, neither the Manufacturer or Dealer, by whom this Manual is supplied, shall in any circumstances be held liable for any inaccuracy or the consequences thereof.