300Tdi Defender Front Axle and Final Drive Upgrade
FRONT AXLE AND FINAL DRIVE
1
SPECIFICATIONS, TORQUE
TORQUE VALUES
NOTE: Torque wrenches should be regularly checked for accuracy to ensure that all fixings are
tightened to the correct torque.
Nm
FRONT AXLE
Hub driving member to hub
65*
.......................................................................
Brake disc to hub
73
.......................................................................................
Stub axle to swivel pin housing
65*
.................................................................
Brake caliper to swivel pin housing
82
............................................................
Upper swivel pin to swivel pin housing
78*
.....................................................
Lower swivel pin to swivel pin housing
78*
.....................................................
Oil seal retainer to swivel pin housing
11
........................................................
Swivel bearing housing to axle case
73*
.........................................................
Pinion housing to axle case
41
.......................................................................
Crown wheel to differential housing
58
...........................................................
Differential bearing cap to pinion housing
90
..................................................
Differential drive flange to drive shaft
47
.........................................................
Mudshield to bracket lower swivel pin
11
........................................................
Bevel pinion nut
130
........................................................................................
Draglink to hub arm
40
....................................................................................
Panhard rod to axle bracket
88
.......................................................................
Radius arm to axle
190
....................................................................................
Radius arm to chassis side member
190
.........................................................
NOTE: * These bolts to be coated with Loctite 270 prior to assembly.