SPEEDOMETER
- Make
- Land Rover
- Model
- Defender 300Tdi Defender
- Section
- SPEEDOMETER
INSTRUMENTS
1
REPAIR
INSTRUMENT PANEL
Service repair no - 88.20.02
Remove
1. Disconnect battery.
2. Remove 4 screws securing instrument panel to
fascia cowl.
3. Pull instrument panel away from fascia sufficent
to disconnect speedometer cable.
4. Disconnect multi-plugs, electrical leads and
connections to vehicle alarm system, if fitted
See ELECTRICAL, Repair, Vehicle
immobilisation and alarm system .
5. Withdraw panel, complete with instruments.
Refit
6. Offer up instrument panel, connect multi-plugs,
electrical leads and connections to vehicle alarm
system, if fitted
See ELECTRICAL, Repair,
Vehicle immobilisation and alarm system .
7. Connect speedometer cable.
8. Secure instrument panel.
9. Reconnect battery.
SPEEDOMETER
Service repair no - 88.30.01
Remove
1. Remove 4 screws securing instrument panel to
fascia cowl.
2. Pull instrument panel away from fascia sufficent
to disconnect speedometer cable.
3. Release both bulb holders from speedometer.
4. Unscrew 2 knurled nuts and remove clamps
securing speedometer.
5. Wihdraw speedometer from instrument panel.
Refit
6. Fit speedometer into instrument panel and
secure with clamps.
7. Fit bulb holders to speedometer.
8. Connect speedometer cable.
9. Secure instrument panel to fascia cowl.
Parts & tools for this job For Land Rover Defender
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Land Rover Defender
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.