landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

ELIMINATING LEAKS ON PUMP HOUSING|Page 674 > < PARKING PAWL MECHANISM
Page 455
background image

44

AUTOMATIC GEARBOX

18

REPAIR

REPLACING TORQUE CONVERTER

1. Remove gearbox and transfer box assembly.

See LT230T Transfer Gearbox

2. Place gearbox on bench. Remove torque

converter using torque converter handles
18G1501, taking care not to damage torque
converter/oil pump housing oil seal.

3. Fit new torque converter using torque converter

handles 18G1501. Check dimension from
converter fixing boss to converter housing face is
50 mm. This shows converter is correctly seated
in housing.

4. Refit gearbox and transfer box assembly.

See

LT230T Transfer Gearbox

ELIMINATING LEAKS ON PUMP HOUSING

1. Remove gearbox and transfer box assembly.

See LT230T Transfer Gearbox

2. Place gearbox on bench. Remove torque

converter using torque converter handles
18G1501, taking care not to damage torque
converter/oil pump housing oil seal.

3. Remove twelve hexagonal bolts (inner ring

pattern).

4. Remove bell housing and pump assembly,

discard gasket.

5. Remove eight hexagonal bolts on rear of pump.

ELIMINATING LEAKS ON PUMP HOUSING|Page 674 > < PARKING PAWL MECHANISM