Workshop Manuals Factory service & repair Land Rover
01 Introduction02 General information03 Information04 Maintenance05 Engine - K Series06 Engine - L Series07 Emission control08 Engine management system - MEMS09 Engine management system - EDC10 Fuel delivery system11 Cooling system - K Series12 Cooling system - L Series13 Manifold & exhaust systems14 Clutch15 Manual gearbox - PG116 Transfer box - IRD17 Drive shafts18 Rear axle and final drive19 Steering20 Front suspension21 Rear suspension22 Brakes23 Restraint systems24 Body25 Heating & ventilation26 Air conditioning27 Wipers & washers28 Electrical29 Instruments
Land Rover Freelander Workshop Manual (1998-2000)11 · Cooling system - K Series
11 · Engine

Radiator

Make
Land Rover
Model
Freelander Workshop Manual
Year
1998–2000
Section
Repairs › Radiator
Cooling system - K SeriesRadiator

RADIATOR

Service repair no - 26.40.01

Remove

  1. Drain cooling system. See Adjustments.
  2. Remove cooling fan. See this section.
Radiator – Remove cooling fan. See this section.
  1. Release clip and disconnect top hose from radiator.
  2. Release clip and disconnect expansion tank hose from radiator.
  3. Remove radiator threaded retainers from top of bonnet locking platform.
  4. Remove radiator.
  5. Remove lower mounting rubbers from radiator.

Refit

  1. Fit mounting rubbers to radiator.
  2. Position radiator and locate to lower mountings.
  3. Fit radiator threaded retainers.
  4. Position hoses to radiator and secure clips.
  5. Fit cooling fan. See this section.
  6. Fill cooling system. See Adjustments.

Parts & tools for this job For 1998 Land Rover Freelander

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.