Engine management system - MEMS
- Make
- Land Rover
- Model
- Freelander Workshop Manual
- Year
- 1998–2000
- Section
- Torque wrench settings › Engine management system - MEMS
InformationEngine management system - MEMS
ENGINE MANAGEMENT SYSTEM - MEMS
| Air cleaner to battery tray bolts | 9 Nm |
| Intake resonator to body bolts | 9 Nm |
| Throttle housing to inlet manifold bolts | 7 Nm |
| Spark plugs to cylinder head | 27 Nm |
| h.t. lead cover bolts | 10 Nm |
| Rotor arm to camshaft, NEW patchlock screw | 8 Nm |
| Ignition coil to bracket screws | 9 Nm |
| Ignition coil bracket to cylinder head bolts | 25 Nm |
| ECM to bracket nut & bolt | 9 Nm |
| Idle air control valve to manifold Torx screws | 1.5 Nm |
| Intake air temperature sensor to manifold | 7 Nm |
| Engine coolant temperature sensor to housing | 15 Nm |
| Crankshaft position sensor to housing bolt | 6 Nm |
| Throttle position sensor to housing Torx screws | 1.5 Nm |
| Oxygen sensor to exhaust manifold | 50 Nm |
| Fuel cut-off inertia switch nuts | 2 Nm |
| Fuel rail to inlet manifold bolts | 10 Nm |
Parts & tools for this job For 1998 Land Rover Freelander
- PARTEngine gasket setSearch: Land Rover Freelander 1998 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.