03 · General

Engine mountings

InformationEngine mountings

Engine front mounting cover plate bolts	45 Nm
Engine front mounting cover plate nuts	35 Nm
Engine RH mounting/PAS pipe bracket nut	80 Nm
Engine LH mounting to body bolts	45 Nm
Engine LH mounting to gearbox bolts	65 Nm
Engine LH gearbox mounting bracket through bolt	80 Nm
Strut to LH engine mounting bolts	80 Nm
Strut to starter motor bolt	80 Nm
Engine RH mounting to body bolts	45 Nm
Engine RH mounting bracket to engine bolts	120 Nm
Engine RH mounting bracket to upper tie-rod bolt	80 Nm
Upper tie-rod to body bolt	80 Nm
Upper tie-rod bracket to body bolts	80 Nm
Lower tie rod bolts	80 Nm
Lower tie rod bracket to sump bolts	45 Nm
Upper tie rod to engine mounting bracket	80 Nm
RH engine mounting plate to engine bolts
and nuts	30 Nm + 120°

Oil pump to block:

M10 bolts +	45 Nm
M6 bolts +	10 Nm
Oil pump diverter plug	35 Nm
Oil pick-up pipe bolts (Patchlok)	8 Nm
Oil squirt jet banjo bolts	12 Nm
Oil pipe to oil pipe union	10 Nm
Oil pipes to pump	25 Nm
Oil strainer to cylinder block bolts	8 Nm
Sump bolts +	25 Nm
Sump drain plug	25 Nm
Sump to gearbox support bracket	25 Nm
Main oil gallery plug	12 Nm
Oil filter	17 Nm; Hand tighten then further 1/2 turn
Dipstick tube bracket bolt	25 Nm
Oil pressure switch	15 Nm
Oil cooler to block:
M10 bolts	45 Nm
M8 bolts	25 Nm
Oil cooler pipe unions	25 Nm
Fuel injection pipe union nuts	28 Nm
Spill return pipes to injectors	10 Nm
Flywheel to crankshaft NEW (Patchlok) bolts +	15 Nm then further 90°
Turbocharger:
Oil drain pipe bolts	8 Nm
Oil feed pipe banjo bolt	20 Nm
Vacuum pipe banjo bolt	25 Nm
Oil pipe union - pump to turbocharger feed pipe	25 Nm

+ Tighten in sequence * New Torx screws must be fitted

Parts & tools for this job For 1998 Land Rover Freelander

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.