Intermediate reduction drive
- Make
- Land Rover
- Model
- Freelander Workshop Manual
- Year
- 1998–2000
- Section
- Torque wrench settings › Intermediate reduction drive
InformationIntermediate reduction drive
INTERMEDIATE REDUCTION DRIVE
| Filler/level plug | 35 Nm |
| Lower tie bar bracket to sump - Diesel | 90 Nm |
| IRD support bracket to sump - Petrol | 90 Nm |
| IRD support bracket to PAS pump bracket - 50 Nm | |
| Petrol | |
| Lower tie bar bolts | 80 Nm |
| Support bracket to IRD bolts | 50 Nm |
| IRD adapter plate to gearbox | 80 Nm |
DRIVE SHAFTS
| Front propeller shaft to IRD unit bolts and nuts | 40 Nm |
| Propeller shaft to viscous coupling bolt | 36 Nm |
| Mass damper to viscous coupling bolts | 90 Nm |
| Rear propeller shaft to axle bolts and nuts | 65 Nm |
| Rear differential flange nut: | |
| Initial tightening | 176 Nm |
| Maximum | 542 Nm |
| Rear differential front mounting bracket bolt | 120 Nm |
| Rear differential front mounting bracket screws | 45 Nm |
| Rear differential rear mounting bracket bolt | 120 Nm |
| Rear differential rear mounting bracket screws | 65 Nm |
| Rear differential oil plug | 27 Nm |
| Viscous coupling support bearing bolts | 25 Nm |
Parts & tools for this job For 1998 Land Rover Freelander
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Land Rover Freelander
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.