Freelander Service Procedures
ENGINE - K SERIES KV6
OVERHAUL 12-3-95
4. Position LRT-12-175 to rear camshaft gears as
illustrated, remove and discard bolts securing
gears to camshafts.
5. Remove rear camshaft gears, timing belt and
LRT-12-175 as an assembly.
6. Remove LRT-12-175 from camshaft gears and
remove timing belt from gears. Discard timing
belt.
7. Remove spark plugs.
8. Remove and discard exhaust camshaft cap
seal from cylinder head.
Note: RH cylinder head illustrated.
9. Progressively loosen then remove 7 bolts
securing inlet manifold to cylinder head,
remove inlet manifold and discard gasket.
10. Remove 4 bolts securing camshaft front timing
belt cover backplate to cylinder head and
remove backplate.
Note: LH backplate illustrated.
11. Remove 2 bolts securing camshaft rear timing
belt cover backplate to cylinder head and
remove backplate.
Note: LH backplate illustrated.
M12 6882
M12 6883